MPD Digital I LMR®400 Coaxial Cable I N Male to N Male Connectors I Low Loss RF Coax I Jumper, CB, Ham Radio, Transmitters, Antenna I 50 FT

Ultra Low Loss Cable is designed to transmit the maximum signal to your antennas. 1/2 inch LMR-400 cable by Times Microwave USA meets Military Specifications with silver foil and silver coated copper conductors for less signal loss in runs up to 200 feet.. In this high quality cable, the dimensions and spacing of the conductors are uniform. Any abrupt change in the spacing of the two conductors along the cable tends to reflect radio frequency power back toward the source, causing a condition called standing waves, reducing the amount and quality of the transmitted power. To hold the shield at a uniform distance from the central conductor, the space between the two is filled with a dielectric designed to maintain the proper spacing between conductor and shielding to assure maximum signal transmission and lowest loss. You should allow three inches of cable to make a 90 degree turn in your runs without causing signal loss. The connectors used with the coax must also hold the correct spacing through the body of the connector to avoid signal loss. The transmission of energy in the line occurs totally through the dielectric inside the cable between the conductors. This shielded cable can be bent and moderately twisted without negative effects, and can be strapped to conductive supports without inducing signal interference.

• LMR400 CABLE TYPE: A Registered Trademark of Times Microwave Systems; LMR-400 Coaxial cable is a direct drop-in replacement for RG-8/9913. This Cable Connects Antennas, Receivers, Meters, Radio transmitters and other applicable RF Sources.
• CONNECTOR TYPES: N type male to N type male; HF/VHF/UHF ; DC up to 6 GHz
• ULTRA LOW LOSS & FLEXIBILITY: This low loss transmission line can be used in almost any rf application where handling characteristics and when improved shielding and Low Loss is required; Ensures maximum performance for your antenna installation.
• OUTER JACKET MATERIAL: Flexible Indoor/Outdoor UV Proof FR-PE, Outer Diameter: .400 (10.3mm) nom., SRL: per MIL-C-17/74. Like all LMR cables the PE Jacket and Dual Shield eliminates the need for conduit and avoiding electrical sources.