Motorcycles 3 angle Valve Job Seat Cutter Set Carbide Tipped

Motorcycles Valve Seat cutter Kit Carbide Tipped 3 Angles Cut Performance Head 30 Degree, 45 Degree, 60 Degree Racing Kart, Clone, Predator, Hemi, Briggs, BSP most Motorcycles or engines if they have a 4.5, 5, 5.5, 6,7 mm, 1/4" mm valve stem, If you are building or rebuilding your own small engines, either for performance or just a quality rebuild, this gives you control of cutting your own valve seats you can do a standard 45 degree seat or even 3 angle seat with this set... you can move the sealing surface on the seat for best performance... this is ONLY if you have 4.5, 5, 5.5, 6,7 mm , 1/4" valve stems this kit comes with the following. 1st Top Angle & 2nd Base Angel Cutters Valve seat cutters: 22 mm 30,45 degree 23 mm 30,45 degree 24 mm 30,45 degree 25 mm 30,45 degree 26 mm 30,45 degree 27 mm 30,45 degree 28 mm 30,45 degree 29 mm 30,45 degree 30 mm 30,45 degree 32 mm 30,45 degree 34 mm 30,45 degree 3rd Throat Angle Cutters 23 mm 60 degree 25 mm 60 degree 28 mm 60 degree 30 mm 60 degree 32 mm 60 degree Valve Guide Stems : 4.5, 5, 5.5, 6,7 mm , 1/4" Valve Guide Reamers H.S.S 4.5, 5, 5.5, 6,7 mm , 1/4" 2 x T - HANDEL 2 x DRIVE RODS WOODEN CASE

• Valve Seat cutter Kit Carbide Tipped. 3 Angles Cut Performance Head- 30 Degree, 45 Degree, 60 Degree.
• Valve seat cutters: 22 mm 30,45 degree || 23 mm 30,45 degree || 24 mm 30,45 degree || 25 mm 30,45 degree || 26 mm 30,45 degree || 27 mm 30,45 degree || 28 mm 30,45 degree || 29 mm 30,45 degree || 30 mm 30,45 degree || 32 mm 30,45 degree || 34 mm 30,45 degree.
• 3rd Throat Angle Cutters: 23 mm 60 degree || 25 mm 60 degree || 28 mm 60 degree || 30 mm 60 degree || 32 mm 60 degree.
• Valve Guide Stems : 4.5, 5, 5.5, 6,7 mm, 1/4" and Valve Guide Reamers H.S.S: 4.5, 5, 5.5, 6,7 mm , 1/4".
• 2 x T - HANDEL, 2 x DRIVE RODS, WOODEN CASE