PINTECH Optically Isolated Probe 350MHz, 2.5V to 2500V, High Voltage Optical-Fiber Isolated Probe for Oscilloscope Attenuator, PTO-350

MODEL: PTO-350 Bandwidth(-3dB): DC-350MHz Rise time: 1ns Measurement Range: 10X Attenuator(standard): ±25V; 20X Attenuator(optional): ±50V; 50X Attenuator(optional): ±125V; 100X Attenuator(optional): ±250V; 200X Attenuator(optional): ±500V; 500X Attenuator(optional): ±1250V; 1000X Attenuator(optional): ±2500V Accuracy(typical): ±1% Accuracy(guarantee): ±1.5% Output Voltage: ±2.5V Noise: ≤6mV rms Delay Time: 20 ns ± 0.1 ns (Standard 2m) Compatible Oscilloscope Input: 1MΩ Isolation Voltage: 60kV Power Supply: Transmitter battery-powered(BATTERY NOT INCLUDED), receiver USB 5V/2A or adapter-powered Cable Length: 2M/78.74in

• PINTECH's optical-fiber isolated probe have a very high isolation voltages, up to 60kVpk. Bandwidth 350MHz. The test accuracy of 1.5% can be guaranteed, and the DC gain accuracy is better than 1%.
• Our oscilloscope probe's response is quickly, tested immediately after power on, no need to warm up and wait. Very low noise, ≤6 mV rms.
• The probe's load effects and parasitic oscillations are minimal, determining the authenticity of signals measured by other voltage probes.
• This probe uses optical fibre to transmit the signal, enabling opto-electronic isolation of the measurement and allowing the probe to float independently of common mode voltages.
• Package Included: PTO-350 Optically Isolated Probe x 1, Adapter x 1, MCX Coaxial Converter Cord x 1, MCX Wire Converter x 1, Test Hook Clamp x 2, MCX Female Connector x 1, Overhead Fixed Bracket x 1, User Manual x 1. 【NOTE】If you want to change to 20X or 50X or 100X or 200X or 500X or 1000X attenuator, please contact us.