HJA58 Linear Actuator Replaces GM1450-LM C109580A5800623 by Richmat for Power Recliner Lift Chairs

This is a genuine Richmat HJA58 linear actuator (Part Number: GM1450-LM) with a 212mm stroke, designed for power recliners and lift chairs.⚠ Compatibility is CRITICAL - Verify Before Purchase:This actuator is NOT cross-compatible. Replacement requires an exact match on your existing unit's label.Must Match Exactly: Model: HJA58 | Part Number: GM1450-LM | Serial Number: C109580A5800623WARNING: The HJA58 Model Number ALONE is NOT Sufficient! HJA58 actuators vary significantly in size and specifications. Compatibility depends on the exact Part Number (GM1450-LM) and Serial Number (C109580A5800623).Key Features:Function: Serves as the primary driving motor for the chair's footrest/base section.Features three essential connection plugs:5-pin Female Plug: Connects to the remote controller.2-pin Male Plug: Connects to the power supply (DC 24V).2-pin Female Plug: Connects to the secondary/auxiliary motor.Specifications:Part Number: GM1450-LMModel Number: HJA58Stroke: 212 mm (8.35 inches)Input Voltage: DC 24VMax. Current: 3AMax. Load Capacity: Push: 6000 N (Newtons) Pull: 4000 N (Newtons)Duty Cycle: Max. 10% (e.g., 2 minutes ON / 18 minutes OFF)

• This is the genuine HJA58 linear actuator (Part Number: GM1450-LM), made by Richmat, suitable for power recliners and lift chairs.
• Please verify the label of your existing motor to ensure it meets the following requirements, otherwise this motor may not be compatible with your chair: Model number must be HJA58; Part number must be GM1450-LM; serial number must be C109580A5800623.
• WARNING: Model Number Alone is NOT Enough: HJA58 actuators vary significantly in size and specs. Compatibility requires the EXACT Part Number (GM1450-LM) and Serial Number (C109580A5800623).
• Key Specifications: Stroke: 212mm (8.35"). Min. Installation Length: 394mm (15.51"). Max. Load: Push 6000N / Pull 4000N.
• This actuator is the primary motor of the chair, it features 3 leads & plugs: female 5-pin (remote controller), male 2-pin (power supply), and female 2-pin (secondary motor).