EZAccessory 4 Wheel Adapters 5x135 to 8x170 Fits Ford F150 97-03 Hub with 125mm Hub Centric Lip for Ford Super Duty Wheels

Product Information:These two piece conversion type wheel adapters are used to convert 5 lug 135mm bolt pattern hub to fit wheels of 8 lug 170mm bolt pattern. Adapters are built with 125mm hub centric lip. If your wheels have 125mm bore, they will be centered on the lip for a factory fit. They will space out your wheels for 2-inch. Check to make sure you have enough clearance. CNC machined with precision craftsmanship using 6061 T6 aerospace quality billet, featured in high load capacity and corrosion resistance. High quality studs are pre-installed. Sold as a set of 4 for all four wheels.Hub centric design for a snug fit on both the vehicles and factory wheels listed below. Significantly reduces stress on bearings and chance of vibrations.Snug Fit 5x135mm Bolt Pattern Hub or the Following Vehicles/Axles with 87mm Hub:Ford: 5 lug F150, 5 lug ExpeditionLincoln: 5 lug NavigatorHub Centric Fit for Factory Wheels (or 125mm Bore wheels) from These Vehicles: Ford: Super Duty F250 (03-on), F350 (03-on)For Ford Super Duty F250 F350 (99-02) - contact us before purchase; lug nuts changes are requiredAdapter Specification:Vehicle Bolt Pattern: 5x135mm Wheel Bolt Pattern: 8x170mm Studs Thread Size: 14x1.5 Hub Bore Size: 87mmHub Centric Lip: 125mm Thickness: 2-inch (50mm) Lug Torque: 95 ft-lbs Black Allen Bolt Torque: 55 ft-lbsTechnical Notes:If hub studs protrude outside the inner adapter piece and prevent the outer adapter piece from sitting flush, it is required to shorten the factory studs.

• 【Purpose】Convert from 5 lug vehicle to 8 lug wheel, meaning putting 8 lug wheels on 5 lug vehicle
• 【Fit Vehicle】Fit vehicles of 5x135mm bolt pattern. Your Garage filter is to confirm fitting of your vehicle only, not for the wheels.
• 【Convert Wheel】Convert to wheel must be 8x170mm bolt pattern. Sold by 2 pairs (4 adapters)
• 【Quality Assurance】Aircraft quality TRUE forged 6061 T6 lightweight billet. CNC machined with precision craftsmanship. Features in high load capacity and keep stock ride. Anodized for corrosion resistance. Heat-treated 10.9 grade steel studs.
• 【Attention】14x1.5 studs; 2" (50mm) thickness; 88mm center bore; Adapters will give you widened stance as well as more stability. If vehicle studs protrude outside the inner piece adapter, you will need to shave down vehicle studs.
• 【Mounting Lug Nuts】Open end mounting lug nuts 12x1.75 included to match vehicle studs