XS-RS02 Tipping Bucket Rain Gauge RS485 Bottom Stainless Steel Single Tipping Bucket Type B 304 Stainless Steel Shell for Flood Control (XS-RS02-Pulse)

This instrument is a primary instrument for measuring precipitation, and its performance meets the requirements of the national standard GB/T21978.2-2014 "Tipping Bucket Rain Gauge". The tipping bucket, the core component of the instrument, adopts a three-dimensional streamlined design, which makes the tipping bucket turn water more smoothly and is easy to clean. This instrument is a precision rain gauge that requires regular maintenance and cleaning of the tipping bucket and the water outlet of the water diversion funnel during use. The tilting angle of the hopper is adjusted and locked in the optimum tilting position at the factory, when installing the instrument you only need to install the tilting bucket and adjusting the base in accordance with this instruction manual to put it into use. Tipping Bucket Rain Sensor is a hydrological and meteorological instrument used to measure natural rainfall and at the same time convert the rainfall into digital information output in the form of switch value to meet the requirements of information transmission, processing, recording and display.

• Resolving power of 0.1mm/0.2mm/0.5mm are available
• The tipping bucket parts are well manufactured, with small friction torque, thus the parts are sensitive to turning, stable performance and reliable work.
• The rain inlet is made of a 304 stainless steel shell that is integrally punched and pulled, with high smoothness and low error caused by stagnant water.
• The rain outlet is equipped with a protective wire mesh to prevent fallen leaves, mosquitoes, and other insects from blocking the rain outlet.