BC2403 + Alligator Clamps: VMAX BC2403 24V 3 Amp 4-Stage Smart Battery Charger and Maintainer

Wheelchair/scooter/mobility/backup charger maintainer. Specifications: Input Voltage: 110VAC Input Current: 1.6A Nominal Voltage: 24V Bulk Charge Voltage: 29.4V Bulk Charge Current: 3A Connector: Insulated alligator connector Battery Type: SLA, GEL, AGM Battery Capacity: 9-60Ah Enclosure: IP54 Size: 6.7 L x 2.8" W x 2" H Weight: 14.5 oz. Easy to use: 1. Connect the AC cord to AC outlet. The “power” LED will light on solid. 2. Connect positive charger clip (red) to positive battery terminal, the black clip to negative. The “25%~100%” LEDs will light in a sequence. If the batteries polarity is reversed or output is shorted, all LEDs will flash simultaneously, DISCONNECT & CHECK. 3. Depending on the charged capacity, 25%~100% LEDs will light up solid. When all are ON, the battery is fully charged. You can disconnect the battery to use OR keep it connected to charge in float mode. If battery stays at Stage 2 after 24 hours of charging, then the battery is defective.

• 24 Volt 3 Amp Charger for 24V AGM, Gel, SLA, and FLA batteries
• LED indicator lights show charging status and battery level
• Auto-detect feature recognizes battery type and status, won't overcharge your battery
• Easy to use, plug it in and forget it! Charges, maintains, and retores your battery.
• Includes alligator clips, see our store for other types of connection cables