Monarch ASP-100 1.00 GPH Stainless Steel Siphon Nozzle with Brass Stem. Replaces Hago SN609-11, 030L2160 and Delaven 30609-11

Monarch ASP100 1.00 GPH Stainless Steel Siphon Nozzle With Brass Stem Note: Capacities are based on rating conditions of 4 inch lift height and 4 PSIG air pressure using No. 2 Fuel Oil (34‐36 SSU Viscosity at 100° F). Capacity and spray characteristics will vary with changing air pressures (or flow) and lift heights. Materials: Tip: Stainless Steel Disc: Stainless Steel Locknut: Brass O-Ring: BUNA N The ASP Aspirator / Siphon Nozzle is an air operated nozzle which produces an extremely fine, fog like atomization. The Nozzle requires no pump for oil pressure since the air pressure creates a suction in the oil line which draws the oil into the nozzle. Features: Produces a solid cone spray pattern with extremely fine droplet size Low air pressures and CFM required for operation Internal nozzle passages are large and the nozzle produces very low flow rates without risk of clogging. No filter is required. Turndown ratio in the range of 3.5:1 over a pressure range of 2 – 10 PSI can be achieved. Replaces Hago SN609-11, 030L2160 And Delaven 30609-11

• Monarch ASP100 1.00 GPH Stainless Steel Siphon Nozzle With Brass Stem
• Note: Capacities are based on rating conditions of 4 inch lift height and 4 PSIG air pressure using No. 2 Fuel Oil (34‐36 SSU Viscosity at 100° F). Capacity and spray characteristics will vary with changing air pressures (or flow) and lift heights.
• Materials: Tip: Stainless Steel Disc: Stainless Steel Locknut: Brass O-Ring: BUNA N
• Features: Produces a solid cone spray pattern with extremely fine droplet size Low air pressures and CFM required for operation Internal nozzle passages are large and the nozzle produces very low flow rates without risk of clogging. No filter is required. Turndown ratio in the range of 3.5:1 over a pressure range of 2 – 10 PSI can be achieved.
• Replaces Hago SN609-11, 030L2160 And Delaven 30609-11