Hydraulic Wood Splitter Pump, 16 GPM 2 Stage Gear Pump Wood Splitter Pumps Log Splitter, for Use with Open Center Hydraulic Systems Only

Specifications:New Hydraulic Log Splitter Pump 13 GPMShaft: ½"Inlet port: 150mmOutlet port: 230mmMinimum 8 HP or larger gas engine.For use with open center hydraulic systems onlyMaximum pressure: 3000 PSIBolt circle: 2.83in.4 holes spaced 2" on centerMounting hole diameter: 344inWoodruff key: 1/8inRotation is clockwiseThis 2 stage pump can give you much faster cycle times and higher possible pressures with a small engine. Excellent for use on log splitters. 85% efficient.The HI/LO section of the pump is all aluminum and the end plates are cast steel. Applications for the HI/LO pump are log splitters, presses etc where rapid movement of the cylinder at low pressure is required prior to automatically switching to the high pressure mode to meet load requirements.Packing Include:1 PC 13 GPM Hydraulic Log Splitter Pump

• ⭐The HI/LO section of the pump is all aluminum and the end plates are cast steel. Good abrasion resistance, durable.
• ⭐The 2-stage pump can give you faster cycle times and higher possible pressure with a small engine. Excellent for use on log splitters.
• ⭐Equipped with 1/2" pump shaft, the log separator is compatible with horizontal and vertical shaft engines. It greatly reduces the difficult-to-solve problems when replacing and operating products.
• ⭐This 2 stage pump can give you much faster cycle times and higher possible pressures with a small engine. Excellent for use on log splitters.
• ⭐The HI/LO section of the pump is all aluminum and the end plates are cast steel. Applications for the HI/LO pump are log splitters, presses etc where rapid movement of the cylinder at low pressure is required prior to automatically switching to the high pressure mode to meet load requirements.